The Journey From Design Thinking to Creative Confidence

This story of Doug Dietz from GE Healthcare is an excerpt from chapter 1 of David and Tom Kelley’s book Creative Confidence.
Redesigning MRIs for Kids

 

A Story About Human-Centered Design 

Doug Dietz is an earnest, soft-spoken Midwesterner with a wry, endearing smile and eyes that are quick to well up with tears at an emotional moment.

A twenty-four-year veteran of General Electric, Doug helps lead the design and development of high-tech medical imaging systems for GE Healthcare, an $18 billion division of one of the largest companies in the world. His multimillion-dollar magnetic resonance imaging (MRI) systems peer painlessly inside the human body in ways that would have been considered magic just a generation ago.

A magnetic resonance imaging (MRI) system.

A few years back, Doug wrapped up a project on an MRI machine that he had spent two and a half years working on. When he got the opportunity to see it installed in a hospital’s scanning suite, he jumped at the chance. Standing next to his new machine Doug talked with the technician who was operating it that day. He told her that the MRI scanner had been submitted for an International Design Excellence Award—the “Oscars of design”—and asked her how she liked its new features. “It was a perfect example of bad interviewing technique,” Doug says abashedly. 

Doug was prepared to come away patting himself on the back for a job well done. But then the technician asked him to step out into the hall for a moment because a patient needed to get a scan. When he did, he saw a frail young girl walking toward him, tightly holding her parents’ hands. The parents looked worried, and their young daughter was clearly scared, all in anticipation of what lay ahead—Doug’s MRI machine. The girl started to sniffle, and Doug himself got choked up telling us her story. As the family passed by, Doug could hear their hushed conversation: “We’ve talked about this. You can be brave,” urged the dad, the strain showing in his own voice.

As Doug watched, the little girl’s tears rolled down her cheeks. To Doug’s alarm, the technician picked up the phone to call for an anesthesiologist. And that was when Doug learned that hospitals routinely sedate pediatric patients for their scans because they are so scared that they can’t lie still long enough. As many as 80 percent of pediatric patients have to be sedated. And if an anesthesiologist isn’t available, the scan has to be postponed, causing families to go through their cycle of worry all over again.

 

From Observation to Empathy

When Doug witnessed the anxiety and fear his machine caused among the most vulnerable patients, the experience triggered a personal crisis for him that forever changed his perspective. Rather than an elegant, sleek piece of technology, worthy of accolades and admiration, he now saw that—through the eyes of a young child—the MRI looked more like a big scary machine you have to go inside. Pride in his design was replaced with feelings of failure for letting down the very patients he was trying to help. Doug could have quit his job, or simply resigned himself to the situation and moved on. But he didn’t. He returned home and told his wife that he had to make a change.


Want to learn and apply the creative-problem solving skills of design thinking? Gain a practical understanding of the design thinking approach through our Foundations In Design Thinking Certificate.


 

The Journey Toward Change

Part I: The Search

So Doug sought advice on this deep personal and professional challenge from friends and colleagues. His boss at GE, who had encountered Stanford’s d.school while at Procter & Gamble, suggested he try out an executive education class. Searching for a fresh perspective and a different approach to his work, Doug flew to California for a weeklong workshop. He didn’t know quite what to expect, but he was eager to embrace any new methodology that would help him in his quest to make MRIs less frightening for young children.

 

Part II: The Workshop

The workshop offered Doug new tools that ignited his creative confidence: He learned about a human-centered approach to design and innovation. He observed and talked to users of existing products and services to better understand consumer needs. He collaborated with managers from other companies and industries on crude prototypes of designs to meet those needs. Gaining new perspectives from them, he continued to experiment and iterate his concepts in class, building on the ideas of others. At the end of the week, the cross-pollination of ideas made him feel more creative and more hopeful than he had when he left home. Going through the human-centered design process with people in diverse industries and roles—from management to human resources to finance—struck a chord in him. “I started to imagine how powerful this tool could be if I brought it back and got cross functional teams to work together.”

By applying human-centered design methods in his own work, Doug believed he could come up with a better solution for children—and he was determined to make it happen. He returned to Milwaukee knowing what he wanted to do. Without significant resources, funding, or support from his own company, Doug knew he couldn’t launch a big R&D project to redesign an MRI machine from scratch. So he focused on redesigning the experience.

 

Part III: The Application

He started by observing and gaining empathy for young children at a daycare center. He talked to child life specialists to understand what pediatric patients went through. He reached out for help from people around him, including a small volunteer team from GE, experts from a local children’s museum, and doctors and staff from two hospitals. Next, he created the first prototype of what would become the “Adventure Series” scanner and was able to get it installed as a pilot program in the children’s hospital at the University of Pittsburgh Medical Center.

 

"A creative mindset can be a powerful force for looking beyond the status quo." 

 

By thinking holistically about how children experienced and interacted with the technology, Doug helped transform the MRI suite into a kid’s adventure story, with the patient in a starring role. Making no changes to the complex technology inside the scanner, Doug and his ad hoc team applied colorful decals to the outside of the machine and to every surface in the room, covering the floor, ceilings, walls, and all of the equipment. They also created a script for machine operators so they could lead their young patients through the adventure.

 

Part IV: The Treasure

One of the prototypes is a pirate ship worthy of an amusement park ride. The ship comes complete with a big wooden captain’s wheel that surrounds the round opening of the chamber—a seafaring detail that also makes the small circumference seem less claustrophobic. The operator tells kids that they will be sailing inside the pirate ship and they have to stay completely still while on the boat. After their “voyage,” they get to pick a small treasure from the pirate’s chest on the other side of the room. In another story, the MRI is a cylindrical spaceship transporting the patient into a space adventure. Just before the whirring and banging of the machine gets louder, the operator encourages young patients to listen closely for the moment that the craft “shifts into hyperdrive.” This reframing transforms a normally terrifying “BOOMBOOM-BOOM” sound into just another part of the adventure. Including the pirate experience and the rocket ship, there are now nine different “adventures.”

 

Part V: The Outcome

With Doug’s new MRI redesign for kids, the number of pediatric patients needing to be sedated was reduced dramatically. The hospital and GE were happy too because less need for anesthesiologists meant more patients could get scanned each day. Meanwhile, patient satisfaction scores went up 90 percent. An MRI transformed into a pirate adventure for pediatric patients.

But the biggest satisfaction for Doug lies not in the numbers, nor in GE Healthcare’s improved bottom line (although these were important for gaining internal support). His greatest reward came while talking with a mother whose six-year-old daughter had just been scanned in the MRI “pirate ship.” The little girl came over and tugged on her mother’s skirt. “Mommy,” she asked, “can we come back tomorrow?” That simple question made all his effort worthwhile.

 

"Creative confidence is an inherently optimistic way of looking at what’s possible."

 

Less than a year after his epiphany, Doug’s increased creative confidence catapulted him into a new role as a thought leader at GE. Would it be an exaggeration to say that, in the process, Doug also helped change the world a bit? Ask one of those young patients or their parents. They already have the answer.


 

A creative mindset can be a powerful force for looking beyond the status quo. Using the methods and mindsets of design thinking—like collaboration, empathy, curiosity, and ideation—helps us believe in our ability to create a better version of the future, whether at work or in our personal lives. Without that belief, Doug wouldn’t have been able to take the first step toward his goal. Creative confidence is an inherently optimistic way of looking at what’s possible.


Doug’s story illustrates how human-centered design can lead to breakthrough innovations and help us better serve the people we are creating for. New opportunities for innovation open up when you start the creative problem-solving process with empathy toward your target audience—whether it’s kids or colleagues, clients or consumers. While competitors focused on the never-ending battle surrounding technical specifications (like scanning speed, resolution, etc...), Doug found a whole new way to improve the lives of patients and their families. In our experience, approaching challenges from a human perspective can yield some of the richest and most rewarding opportunities for change.

 

Want to learn and start using the creative-problem solving skills of design thinking? Gain a practical understanding of the design thinking approach through our Foundations in Design Thinking Certificate.

Check out our Design Thinking Overview page and Design Thinking Resources page as well. 


Starting Soon

Foundations In Design Thinking - IDEO U Certificate
Designing Strategy Course from IDEO U
×

You are creative

Get tips on building creative confidence and applying the skills of design thinking.

Awesome, you're in!

×

Get the Syllabus

Enter your email to receive the syllabus and email communications from IDEO U.

Thanks!

The syllabus should be in your inbox shortly. Click below to view the syllabus now.

VIEW SYLLABUS